Safe Touch Vinyl Gloves Bundle for Nursery Staff (Pack of 3x1000)

Safe Touch Vinyl Gloves Bundle for Nursery Staff (Pack of 3x1000)

x3 boxes of gloves containing x1000 gloves in each box

Item

Disposable Vinyl Gloves Powdered & Powder Free (Clear/Blue/Yellow/Green/Red)
Sizes – S-XL
Produced in conformance with the regulation (EU) No 2016/425 of the European Parliament and of the council and national standards EN ISO 374-1:2016+A1:2018, EN 374-2: 2014, EN 16523-1:2015, EN 420:2003+A1: 2009, EN 374-4:2013, EN ISO 374-5:2016. The relevant information and standards of the product are listed in the user manual in correspondence with Declaration of Conformity that can be found at https://www.regaldisposables.co.uk/comformity

Features

• Ambidextrous
• Straight Fingers
• Beaded Cuff
• Smooth Surface

Instruction for individual user

1. This product is a single-use item, do not reuse.
2. The product packages in Paper Dispenser Boxes, a paper carton then encloses these Dispenser packages to be transferred. It should be stored to avoid excessive temperatures of above 40 degrees Celsius (104 degrees Fahrenheit) and should avoid exposure to direct sunlight, fluorescent lighting, and X-Ray radiation.
3. Users of this product should consider its adaptation to the environment, for example: the user is able to remove the powder from powdered gloves by wet wipes, sponges, or any other effective way.
4. This product provides a biological and chemical barrier of protection. For information, please refer to label.
5. If this product is used and contaminated, it should be disregarded/disposed of using an appropriate method.
6. If user experiences a reaction such as itchy skin, rash, or any other allergic reaction to this product, then the user should discontinue use immediately and seek medical advice.
7. If the wearer is using sharp objects, devices and/or materials they will cause ruptures or holes in the material, please be cautious.
8. It is recommended that the user check the gloves are suitable for the intended use as conditions in the workplace may differ from laboratory testing factors such as: temperature, abrasion, and degradation.

Warnings

1) This information does not reflect the actual duration of protection in the workplace and the differentiation between mixtures and pure chemicals.

2) This product can cause skin irritation or reactions for some wearers. It should be used with caution. If any symptoms arise, discontinue use immediately and seek medical advice.

3) The Chemical resistance has been assessed under laboratory conditions from samples taken from the palm only (except in cases where the glove is equal to or over 400mm – where the cuff is tested also) and related only to the chemical tested. It can be different if the chemical is used in a mixture.

4) The penetration resistance has been assessed under laboratory conditions and relates only to the tested specimen.

5) It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may differ from the type test depending on temperature, abrasion, and degradation.

6) When used, protective gloves may provide less resistance to dangerous chemicals due to the changes in physical properties. Movements, snagging, rubbing, degradation caused by chemical contact may reduce actual use time significantly. For corrosive chemicals degradation can be the most important factor to consider when selecting the right chemical resistant gloves.

7) Degradation results indicate the change in puncture resistance of the gloves after exposure to the challenge chemical.